Series 1250
Pneumatic Plunger Pump
CheckPoint’s Series 1250 pump delivers up to 8 USG/H (30.38 L/H) and can reliably inject into pressures up to 12,000 PSIG (827.4 BARG).
CheckPoint’s modularly designed chemical heads and range of plunger sizes meet a wide variety of injection applications. Our pumps maintain unparalleled chemical resistance due to the essential integration of high-quality, proprietary seal materials. In order to meet a wide variety of chemical compatibility needs, wetted parts are available in an array of materials, such as 316 SS, Hastelloy C-276, Duplex 2205, Super Duplex 2507, PVC, ceramic and titanium, and seals are available in Viton, HNBR, FKM, and FFKM. All construction materials are compatible with sour gas according to NACE MRO175 and ISO 15156.
Performance Data
1/8″ Plunger (High Pressure)
1/4″ Plunger (High Pressure)
Operating Manual
Sales Brochure
Order Guide
Rentals
CheckPoint’s positive displacement, reciprocating chemical injection pumps are specifically designed for, and extensively proven in, demanding oil and gas production applications worldwide. Our pumps are utilized in various industries, such as pulp, water treatment, fertilizer dosing, paper, and fluid processing applications, where precise delivery is operationally paramount. The pneumatic motor, composed entirely 316L SS, remains isolated from the wet end and is dependably able to run on pressurized gas or liquid without stalling. CheckPoint’s double-acting design eliminates a return spring, which greatly increases repeatability and reliability over time.
Performance Data
| Series 1250 | |
|---|---|
| Cycle Rate / Minute 1 | 0.5 – 105 2 |
| Supply Pressure | 20 – 200 PSIG (1.4 – 13.8 BARG) |
| Piston Diameter | 2.50 in (64 mm) |
| Stroke Length3 | 0.94 in (24 mm) |
| Weight | 11 lbs (5 kg) |
| Height | 12 in (305 mm) |
| Turndown Ratio (max / min cycle rate) | 210 |
1. Series 1250 “Short Stroke” models cycle rate / minute ranges from 1 – 210
2. Series 1250 can cycle faster than the max. listed rate; not recommended for long-term use. Contact CheckPoint before operating above 105 cycles/minute.
3. “Short Stroke” models have a stroke length of 0.5 in (13 mm)
| Model | Flow Rate (Minimum) USG/H (L/H) |
Flow Rate (Maximum) USG/H (L/H) |
Working Pressure (Maximum) PSIG (BARG) |
Piston Diameter IN (MM) |
Plunger Diameter IN (MM) |
Dimensions L x W x H IN (MM) |
Weight LB (KG) |
Suction Connection | Discharge Connection |
|---|---|---|---|---|---|---|---|---|---|
| 1250B 1/8" | 0.002 (0.007) | 0.47 (1.8) | 12,000 (827.4) | 2.5 (63.5) | 1/8 (3.2) | 5.54 (141) x 6.50 (165) x 12.07 (307) | 11 (5) | 1/4" MNPT | 1/4" MNPT |
| 1250B 3/16" | 0.007 (0.026) | 1.14 (4.3) | 7,500 (517.1) | 2.5 (63.5) | 3/16 (4.9) | 5.54 (141) x 6.50 (165) x 12.07 (307) | 11 (5) | 1/4" MNPT | 1/4" MNPT |
| 1250B 1/4" | 0.013 (0.05) | 2.0 (7.6) | 12,000 (827.4) | 2.5 (63.5) | 1/4 (6.4) | 5.54 (141) x 6.50 (165) x 12.07 (307) | 11 (5) | 1/4" MNPT | 1/4" MNPT |
| 1250B 3/8" | 0.04 (0.16) | 4.67 (17.7) | 7,500 (517.1) | 2.5 (63.5) | 3/8 (9.5) | 5.54 (141) x 6.50 (165) x 12.07 (307) | 11 (5) | 1/4" MNPT | 1/4" MNPT |
| 1250B 1/2" | 0.08 (0.31) | 8.0 (30.3) | 5,000 (344.7) | 2.5 (63.5) | 1/2 (12.7) | 5.54 (141) x 6.50 (165) x 12.07 (307) | 11 (5) | 1/4" MNPT | 1/4" MNPT |
Tabular data should be used for quick reference only. See performance curves for accurate pump selection.
This performance data represents the standard Series 1250. Contact CheckPoint for additional data.
Series 1250 Pneumatic Pump: Frequently Asked Questions
What is the CheckPoint Series 1250?
The Series 1250 is a compact pneumatic plunger chemical injection pump driven by pressurized gas or air. It delivers 0.002 to 8.0 USG/H (0.007 to 30.28 L/H) and injects into pressures up to 12,000 PSIG (827.4 BARG) depending on plunger size.
What plunger sizes are available on the Series 1250?
Five plunger sizes: 1/8 inch (up to 12,000 PSIG, 0.47 USG/H max), 3/16 inch (7,500 PSIG, 1.14 USG/H), 1/4 inch (12,000 PSIG, 2.0 USG/H), 3/8 inch (7,500 PSIG, 4.67 USG/H), and 1/2 inch (5,000 PSIG, 8.0 USG/H). Smaller plungers reach higher pressure, larger plungers give more flow.
What drives the Series 1250 pump?
A pneumatic motor powered by instrument gas or compressed air. The pump is able to run on pressurized gas or liquid without stalling, which makes it suitable for remote wellsites where electricity is unavailable.
How big and heavy is the Series 1250?
Approximately 5.54 x 6.50 x 12.07 inches (141 x 165 x 307 mm) and 11 lb (5 kg), with 1/4 inch MNPT suction and discharge connections.
How should the Series 1250 be mounted?
CheckPoint recommends vertical mounting where possible so the suction check valve closes with gravity assistance. Other orientations are possible if the chemical head is no higher than the motor and a spring-loaded suction check is fitted.
What chemicals can the Series 1250 inject?
Corrosion and scale inhibitors, hydrate inhibitors such as methanol and MEG, biocides, demulsifiers, and scavengers, among others. Wetted materials are selected for chemical compatibility, with 316 SS standard and alloy and polymer options available.
















